Operation Manual

SRC-3000 User’s Manual
32
Controlling Devices
1. Make sure the SRC-3000 is pointing at the target
device.
2. Tap gently on the Touch Screen.
3. Select a device key and give remote commands
as usual.
If
appears, the pressed key is not pre-programmed with
a specific function.
NOTE: The Record Key (under VCR device, page 1) must be
held down for two seconds. As a safety feature, the record
key needs to be pressed for two seconds. This is to prevent
accidentally pressing the VCR record key and overwriting a
tape.