Operation Manual

Normal Operation
Once you have set up the URC for your A/V equipment, it works like your
original remote controls. To operate, just aim it at your equipment, press
an appropriate device mode key and invoke the desired function by
pressing a corresponding key on the URC. The indicator flashes during
signal transmission and as confirmation of key touch.
Master Reset/ResetDefault
Master reset allows you to reset your URC to its factory default state. (After
Master Reset, you have to set up the URC from beginning. Before you do
this, please make sure it is really necessary).
1. Remove the battery cover on the back side of your URC.
2. Make sure your URC is loaded with fresh batteries.
3. Locate the mini USB connector inside the battery compartment.
4. Connect your URC with the provided USB cable to your PC (via one of
the available USB Port).
5. Once, your URC is connected to your PC, it will launched a browser
(Internet Explorer) to reach our online database setup server.
Remarks: If your browser is not running after the connection of the URC to
your PC, you have to double-click the icon (KRMAP.exe) on your desktop.
6. On the Remote Setup page, simply click button once.
OPERATING THE URC
ResetDefault
9
GB
Remarks: Master Reset of URC will erase ALL learned commands as well.
7. Click button once and wait patiently for 1 minute, your URC
will be reset to factory default
Create