Installation Manual
Table Of Contents
HIGH POWER
43dBm Dual Band
Digital Radio
© Sunwave IM_CF_H2 v1.0.0 | 19 of 47
Contact
us
today:
www.sunwave.com
cf_support
@sunwave.com
DC Power Connections
Attach Handle to A2
Attach the 19" mounting brackets to the rear of the A2 unit, using 4 screws M3×16 per bracket and the Phillips screwdriver. Observe
the orientation of the brackets shown in 0.
Attaching a 19" Mounting Bracket
Mount A2 to Wall
Marking the position of mounting holes
1. Hold the A2 to the installation location and
mark the position of the 4 mounting holes in
the mounting brackets.
2. Drill the mounting holes according to the
chosen mounting accessories.
Mounting completed
3. Attach the dowels, expansion screws, or the
similar and fasten the A2 to the wall.