User's Manual

CrossFire – A revolution in RF Transport for In Building Wireless
User Manual
90 Revision 1.0.1
upgrade.
8.2. Remote Upgrade
Use FTP to perform an upgrade remotely. As shown in Figure 8-5, set up the FTP server IP address, port number,
login name, login password, file storage path and filename to be upgraded. Then, set the FTP File Transfer Control item
to “Start upgrade”. To complete the upgrade, click the Set button to download the software from the FTP server. When
using this method, ensure that the FTP server is running correctly and the file to be upgraded has been saved in the
specified directory.
Figure 8-5 Setting up Remote Upgrade via FTP
If the IDAS is connected to an NMS, the operations above can be set through the NMS to implement a remote
software upgrade, as shown in Figure 8-6.