User's Manual

CrossFire – A revolution in RF Transport for In Building Wireless
User Manual
65 Revision 1.0.1
Figure 6-5 Exploded View of RU Side-mounting Installation
6.3.4. Suspension Installation (For AU and EU, Optional)
To install a device using a suspension installation:
1. Fasten two hangers to the sides of device with 8 M3*6 screws. See Figure 6-6 for details.
2. Measure the dimension between the centres of hangers. See Figure 6-7 for details.
3. Choose an appropriate indoor location. Mark 4 holes sites for the stand-off bracket to be attached to the wall.
See Figure 6-8 for details.
4. Hang the device on the stand-off bracket and fasten with the bolts. See Figure 6-9 for details.