User's Manual

CrossFire – A revolution in RF Transport for In Building Wireless
User Manual
20 Revision 1.0.1
a) Click Network Connections
b) Click Local Area Connection Properties
a. Click TCP/IP Properties
b. Change the following parameters as indicated:
IP address: 10.7.3.1
Subnet mask: 255.0.0.0
Default Gateway: 10.7.3.200 (IP address of Master AU)
3. Check the status of the Local Area Connection and confirm the connection is connected.
4. Open a browser window and enter the default gateway in the navigation bar. This will access the WebOMT
page. Figure 2-2 shows an example using 10.7.3.200 as the default gateway.
Figure 2-1 Setting up a Wired Connection to the OMT on the Master AU