User's Manual

CrossFire iDAS – All-Digital Transport System
User Guide
© SUNWAVE SOLUTIONS LIMITED 2017 45 Version 1.0
7. System Networking
7.1. Device Connections
AU
(Master)
AU2
EU-E
PWR
Slave
MasterGE1
GE2
10GE1
10GE2
AU1 OP1 OP2 OP3
GE 10GE
Fiber
CAT6A
NPRU
TX1
TX2
RX1
RX2
PSU
L
N
PE
AU
(Slave)
AU2
AU1 OP1 OP2 OP3
Fiber
Figure 7-1 System Connection Schematic
7.1.1. Optical Interface Connection
·Single Optical Fiber-module
The optical connector unit includes an optical module and optical fibre. Figure 7-2 shows that when using a
pair of single optical fibre-modules, the wavelength of the two modules is different, for example 1271nm &
1331nm are two wavelength of a pair of Bidirectional Optical Fiber Module. See Table 7-1 for the optical
fibre module corresponding to each port. Every time connecting two devices, check optical transceiver
indicators of both devices. The green indicators mean two devices are synchronized. When the optical
module is unplugged or not synchronized, the indicators are red as shown in the left pair of indicators in
Figure 7-3.