User's Manual

CrossFire iDAS – All-Digital Transport System
User Guide
© SUNWAVE SOLUTIONS LIMITED 2017 40 Version 1.0
behaviors and their meaning.
STATUS
Description
Flashes green
Device runs normally without alarm
Turns green and stays lit
Software has crashed, but it can reboot automatically in 3mins
Flashes red
Device runs normally but alarm arise
Turns red and stays lit
Software has crashed, but it can reboot automatically in 3mins
Flashes Orange slowly
Software is upgrading
Turns orange and stays lit
Device is in progress of synchrony to AU
Flashes orange quickly three times and
then turns green and stays lit
Device is starting
Flashes quickly
Device Pop-Flash is on for catchup device
Table 6-2 STATUS Indicator
6.4. OMT Parameters, Alarms and Commands for the NPRU
See Section 3.3, OMT Display, for information on how to use the WebOMT interface to view and change
parameters and run commands.
6.4.1. NPRU LAN Connectivity
Parameter
Description
RD/RW
Vendor
Name to distinguish from different manufacturers
RD
Product Model
/
RD
Serial Number
/
RD
Software Version
/
RD
FPGA Version
/
RD
Device ID
Number to distinguish the subsets in the same site
RD
Device Sub ID
/
RW
Device Location
/
RW
Site ID
The unique identification number of the site in the system
RW
Date and Time
/
RW
Site Report
/
RW
Table 6-3 General
Note: The input fields cannot contain the following special characters: %, &, ‘, “, \