User's Manual

CrossFire iDAS – All-Digital Transport System
User Guide
© SUNWAVE SOLUTIONS LIMITED 2017 13 Version 1.0
1. Connect a PC to Slave device with a network cable in the CONSOLE port in the front panel.
2. Change the TCP/IP properties (see Figure 3-3):
a) Click Network Connections
b) Click Local Area Connection Properties
c) Click TCP/IP Properties
d) Change parameters as indicated:
a. Select Obtain an IP address automatically
b. Select Obtain DNS server address automatically
3. Check the status of the Local Area Connection and confirm the connection is connected.
4. Open a browser window and enter the default gateway in the navigation bar to access the WebOMT
page.
Figure 3-3 Wired access to WebOMT of Slave AU and EU-E