User's Manual

CrossFire iDAS – All-Digital Transport System

User Guide

Fix AU with Screws

3. Fix the AU using 2 screws M6×16 on both

side and the Phillips screwdriver (Fig.5).

Note: For rack installation, the separation of adjacent AUs shall be over 3U (1U = 44mm) without fan or

2U with fan occupied in middle.

 Connect power and ground cable to AU

Connect Power Cable at Rear Side

1. Connect and lock the power cable at the AU

rear side (Fig.6).

Connect Ground Cable at Rear Side

2. Connect and screw the ground wire at the AU

rear side (Fig.7).