User's Manual

CrossFire iDAS – All-Digital Transport System
User Guide
© SUNWAVE SOLUTIONS LIMITED 2017 10 Version 1.0
Installation of the AU
6.1. Mount the AU in the Rack
 Attach AU handle
Attaching a 19" Mounting Bracket
1. Attach the 19" mounting brackets at the AU
front, using 4 screws M3×16 per bracket and
the Phillips screwdriver. Observe the
orientation of the brackets (Fig.2).
 Attach sliding rails and AU to rack
Attached Sliding Rails
1. Attach the sliding rails Ⓑ to the rack (Fig.3)
Note: the sliding rails is not included in
delivery.
Place AU in Rack
2. Place the AU in the rack (Fig.4)