Instructions / Assembly

NOTICE
ASSEMBLY INSTRUCTION
KBK-Y08
1.Make sure you have enough space to layout the parts before starting，assemble the item as close to its final
position as possible.
2.Check you have all the components and tools.
3. Do not stand or put weight on the product during assembly, this could cause damage.
4.Place the item on a flat ground to adjust and make sure it
remains stable.
5.Please note that screws are first inserted by hand and only tighten so that it holds and loosely connects the
elements 2.50%tighten before fxing all screws,Allen wrench is recommended instead of an electric drill.
6.Tighten up all screws with tools gradually.
7.When tightening the bolts, ensure that the holes are matched correctly and that partsare kept perpendicular to
each other.
8.If the screwsare not aligned with holes during assembly, please loosen all the other screws to 50% and
continue the assembly process.
9.If the item isnot stable,please loosen all the screws,adjust it on a flat ground and tighten up all screws again.
10. Glass Table Warning:to avoid breaking or injury, do not bump, Dispose of all packaging carefully and
responsibly; Keep children and animals away from the work area. small parts could choke if swallowed.