Instructions / Assembly

ASSEMBLY INSTRUCTION
KBK-Y05
1/10
1.Make sure you have enough space to layout the parts before startingassemble the item as close to
its final position as possible.
2.Check you have all the components and tools.
3. Do not stand or put weight on the product during assembly, this could cause damage.
4.Place the item on a flat ground to adjust and make sure it
remains stable.
5.Please note that screws are first inserted by hand and only tighten so that it holds and loosely connects
the elements 2.50%tighten before fixing all screws,Allen wrench is recommended instead of an electric
drill.
6.Tighten up all screws with tools gradually.
7.When tightening the bolts, ensure that the holes are matched correctly and that partsare kept
perpendicular to each other.
8.If the screwsare not aligned with holes during assembly, please loosen all the other screws to 50%
and continue the assembly process.
9.If the item isnot stable,please loosen all the screws,adjust it on a flat ground and tighten up all screws
again.
10. Glass Table Warning:to avoid breaking or injury, do not bump, Dispose of all packaging carefully
and responsibly; Keep children and animals away from the work area. small parts could choke if
swallowed.
NOTICE

Summary of content (10 pages)