User Manual

SAFETY WARNING：
1. When the skateboard battery has 5% left, the power output will be cut off to better protect the battery.
(In free mode, both the power output and brakes will be restricted)
2. Connect the magnetic port on the charger to the power button on the board before plugging into the wall outlet.
(Only use an origina l Exway X1 pro charger)
SPECIAL NOTES：
1. The Exway board can be fully charged in about 4 hours 30 minutes. When fully charged the battery charger
indicator light is green.
2. Please refer to the Exway APP or the official website for the latest version of the product manual.
Operation & The state of the indicator lights:
02
Battery Level
with the power off, short press
power Button, light will flash to
indicate battery level.
(1 bar = 25% battery capacity)
Turn On The Board
long press power button for
2 seconds.
Turn Off The Board
With the power on, long press
PowerButton for 3 seconds.
Pairing Mode
With the power off, long press power
Button for 8 seconds.
(light will flash in an anticlockwise
direction)
Brick Recovery/Firmware
Upgrade Mode
With the power off, short press Power
Button for around 7 times.
(light will flash in a clockwise direction)
Charging
light Flashes Continuously.