Brochure

SPECIFICATIONS* /ORDERING INFORMATION
30-50 psi waste oil2.5/1.5 gphR.H.R.H.3450/1725A2RA-7739
Waste oil application2.5R.H.R.H.1725A1RA-7738
10-20 psi waste oil application2.5/2.5**gphR.H.R.H.3450/1725A2RA-7737
Waste oil application2.5/2.5**gphR.H.R.H.3450/1725A2RA-7736
Waste oil application2.5/.4 gphR.H.R.H.3450/100A2RA-7710
Solenoid dumping fuel
unit .32mm hub
3 gphR.H.L.H.3450A2VD-7519
Solenoid dumping fuel unit3 gphR.H.R.H.3450A2YA-7430
3 gph at 200 psi7 gphR.H.R.H.3450A2YA-7916
7 gphR.H.R.H.3450/2850A2YA-7743
Solenoid dumping fuel unit3 gphR.H.R.H.3450A2VA-7416
--3 gphL.H.L.H.3450A2VC-7118
--3 gphL.H.R.H.3450A2VB-7117
--3 gphR.H.R.H.3450A2VA-7116
--2.25 gphR.H.R.H.2850A2VA-7142
A2VA-3006
--7 gphR.H.R.H.1725A1YA-7912
3-bolt mtg. hub3 gphR.H.L.H.1725A1VD-7741
--3 gphL.H.L.H.1725A1VC-7114
--3 gphL.H.R.H.1725A1VB-7113
--3 gphR.H.R.H.1725A1VA-7112
Special
Features
Strainer &
Nozzle Rating
at 100 psi
Nozzle
Port
Location
1
Rotation
1
RPM
Model
Number
*Also apply to “-6” model numbers (shown on fuel unit).
For example: “7916-6,” etc.
1
Viewed from shaft end.
**Use gage port for rated flow @ 1725 rpm, no cut off.
Note: All ports shown in diagram are reversed for left-hand nozzle fuel units.
I-2