Spec Sheet

Wall Cabinet Component & Spacer Panels
SUNSTONE METAL PRODUCTS
DESCRIPTION
Match below Item Numbers with
corresponding Panels and Componets
Wall Cabinet Spacer &
Component Group
PRODUCT
16004 CENTRAL COMMERCE DR.
PFLUGERVILLE, TEXAS 78660
Tel: [phone]
Bus: 512.487.5116
Fax: [phone]
See Drawing Diagram for
Dimensions
MATERIAL SPECS
304 Stainless Steel entire
structure, 18 Gauge for Door
Panel , 18 Gauge for Cabinet
Box, 18 Gauge for Shelf,
Handles are made of Solid 304
Stainless Steel Bar.
A)SWC42EP -42" Height End Panel
B)SWC21EP -21" Height End Panel
C)SWC12ECR -13" End Crown Panel
D)SWC3SPF90 -3" X 3"Corner Spacer
E)SWC3SPF -3" Full Height Spacer
F)SWC6SPF -6" Full Height Spacer
PRODUCT DIMENSIONS
13" WIDTH
42" HEIGHT
12" WIDTH
42" HEIGHT
42" HEIGHT
42" HEIGHT
21" HEIGHT
13" WIDTH
2" HEIGHT
2" ADDITIONAL CROWN
PANEL HEIGHT
END PANEL IS 1" INCH THICK
END PANEL IS 1" INCH THICK
SWC12ECR
A) SWC13FEP
E) SWC3SPF
C) SWC12ECR
A) SWC42EP
F) SWC6SPF
D) SWC3SP90
B) SWC21EP
A) SWC42EP
C) SWC12ECR
D) SWC3SPF90
E) SWC3SPF
F) SWC6SPF
B) SWC21EP
EXAMPLE WALL CABINET CONFIGURATION
3" x 3"