User Manual

NG Gas Hook-up
Natural Gas grills is designed to operate on Natural Gas ONLY, at a pressure regulated at 7” water
column (W.C.) when equipped with the correct natural gas orifices on the valves and a NG regulator
on the supply line regulated at the residential meter.
GAS SETUP
–
NATURAL GAS INSTALL
PAGE 15
Follow Instructions:
1. The tank valve & all Knobs should be in the “OFF” position. If not, turn the knob clockwise until it
stops.
2. Insert the regulator inlet into the tank valve and turn the coupling nut clockwise until the coupler
tightens up (see picture above). Do not over tighten the coupler. Turn the main tank valve on and
turn the burner control valves on the unit to the “HIGH” position for about 20 seconds to allow the
air in the system to purge before attempting to light the burners.