How to Guide

INSTALLING COMPONENTS – SUN13VDB LED LIGHT
1. Locate the Transformer
Remove the transformer from the plastic bag located
in the interior of burner box. Make sure the
Transformer is complete, and double check the plug
cord is properly secured to transformer, and all wires
are firmly fixed into plastic clip plug.
2. Mount Transformer
Using metal screws and attach the transformer to the
back inner wall of your island’s cabinet wall,
somewhere near the already installed GFCI electrical
outlet. When you plug the transformer in, double
check then GFCI breaker switch, that the outlet has
power.
3. Make Connections
Locate the Light Plug on the underside of burner.
The connection clips together, to form a secure
connection. Double check that all wires are tightly
pushed into plug sockets, so all wires make proper
connections.
7
LIVE CIRCUIT: Indicates a potentially hazard from Live electrical current that if extreme caution
is not used, may result in minor or moderate personal injury, or property damage.
Connect to Left
Back Side
Back Left of
Burner Female
Connection
Mount on Interior
Island Wall