User Manual
GRILL START
-
UP
–
LIGHTING THE GRI
LL
PAGE 14
REMOVE COVER & OPEN VENT
1. Ensure Grill
Control Knobs
are In the OFF position, turn
either KNOB to High Position.
2. Light the Main Burners by turning
either KNOB counter-clockwise
SLOWLY to HIGH Position. Allowing
Gas to Completely Fill the burner
chamber.
3. You will hear a loud click as the
electronic lighter produces a spark.
Listen for the sound of the gas
igniting and look for a glow of Fire
Red through the cooking grids. If the
burner does not light on the first try,
repeat immediately.
4. If the burner does not light in 5
seconds then wait five minutes until
the gas clears before attempting to
light it again. Repeat the procedure or
try manually lighting the burner using
a long neck lighter or spark arrest.
5. Upon successful lighting, repeat
the process on the other burner.
6. To shut off the burners, rotate the
knob and turn to OFF.
7. It is normal to hear a popping
sound when the burners are turned
REMOVE COVER WHEN
LIGHTING THE GRILL & OPEN
BACK VENT PANEL
TIP: The gas must completely fill the
entire burner chamber, so repeat this
procedure until the burner ignites all
the way from front to back.