Side Burner Owners Manual

LOCATING BURNER – SUN13DSB Installation
WARNING: Never build shelf or enclose interior space under the Burner Cut-Out. The Side
Burner is Self-Rimming and is supported by the top counter. The bottom of Burner needs to be open to
allow for proper ventilation. ALLOW 6 INCH MINIMUM CLEARANCE FROM UNDERSIDE OF COUNTER
BURNER BACK TO INTERIOR ISLAND WALL – MUST ALLOW AIR FLOW AROUND BACK OF BURNER.
Double Side Burner Cut-Out
The Versa Double Side Burner is SELF-RIMMING, meaning the lip of burner rests on top of the counter
edge around the cut-out and is Free Hanging from counter top. Make Cut-Out according to details below,
remember if counter overhangs make 1x1 notch Cut on Left & Right sides to allow Burner to rest flush
against island wall. Be sure to make all Electrical & Gas Connections to back of Burner before sliding into
position. See pages 7 thru 10.
4
Side Burner installed as Free-Hanging from Counter-Top, Do Not Build any Shelf or
Enclosure below the burner, Island interior should be open.
 Product Size --------------------------------- 13” Width x 23-1/2” Depth x 12-1/2” Height
 Cut-Out Size --------------------------------- 12” Width x 20-1/4” Depth x 9” Height
 NG Flare Adapter ----------------------------------------------------------------------- -1/2” Flare
 LP Flare Adapter--------------------------------------------------------------------------3/8” Flare
 Burner BTU Rating -----------------------------------------------------------Up To 30,000 BTU’s
 Water Column Size------------------------------------------------------------------------ 4 Inches