Spec Sheet

Compatible between 23-7/8" to 28-1/2”, 10-3/8" to 12-3/4” Max Height with
counter at 3/4" Height with Filler Rail installed or removed. (Additional Height
can be adjusted by Removing Bottom Filler Rail or by adding a Thicker Counter or
Backer Board)
SCC34CTK5
Item No.
23-7/8" Width
SCC34CTK4.5
Item No.
25" Width
SCC34CTK3.75
Item No.
26-3/8" Width
SCC34CTK3.25
Item No.
27-1/2" Width
SCC34CTK2.5
Item No.
29" Width
12-3/4" H
w/3/4" H Counter
Model Number
Sleeve Cut-Out
Product Option
SCC34CTK2.5
SCC34CTK3.25
SCC34CTK3.75
SCC34CTK4.5
SCC34CTK5
29" Width x 12-3/4" Height x 24-
1/2" Maximum Depth
27-1/2" Width x 12-3/4" Height x
24-1/2" Maximum Depth
26-3/8" Width x 10-3/8" Height
w/Rail or 12-3/4" Height wo/Rail x
24-1/2" Maximum Depth
25" Width x 10-3/8" Height
w/Rail or 12-3/4" Height wo/Rail
x 24-1/2" Maximum Depth
23-7/8" Width x 10-3/8" Height
w/Rail or 12-3/4" Height wo/Rail
x 24-1/2" Maximum Depth
PCM® 30" Charcoal, Twin Eagles® 30"
Charcoal, Vintage® 30" Charcoal, Alfresco®
30" Varsa Apron Sink, Solaire® 30" Bar Station,
Bull® 30" Bar Center, Beefeater® 30" Bar
Center, Lynx® 30" Bar Center
Sunstone® 28" Charcoal, Fire Magic®
Aurora® Grill
Support Rail
Counter Rail
Filler Rail
Trim-Kit Sleeve Dimensions
Removable Filler Rail makes Height
10-3/8" H w/Counter
Removable Filler Rail makes Height
10-3/8" H w/Counter
SAC34CGDC TRIM-KIT
Disclaimer: The trademarks used in the “Product Option” column below belong to their respective owners who do not sponsor nor are they
affiliated with Sunstone Metal Products, L.L.C. The specific product Cut-Out Dimensions have not been directly confirmed by any Sunstone
Metal Products LLC, representative or employee. Use own discretion to confirm exact product fit.
12-3/4" H
w/3/4" H Counter
12-3/4" H
w/3/4" H Counter
12-3/4" H
w/3/4" H Counter
12-3/4" H
w/3/4" H Counter
PGS® 27" Beverage Center, Sunstone®
30" Hybrid Grill
PGS® 24" Beverage Center, Solaire 24"
Bartending Station,
CALL OUR TECH. SUPPORT 888-934-9449
24-1/2"
MAX DEPTH
Move Counter Rail Support
Forward in increments of
1-3/16" as needed or
Remove for full depth
as needed.
Attach
each Trim
Kit Panel
to each
side
1.
Attach Counter
Rail Top Panel
2.