Spec Sheet

SUNSTONE METAL PRODUCTS
DESCRIPTION
30" Appliance Cabinet for Kamado
BBQ's & Power Burner Counter Install
Item No. SAC30KBDC
PRODUCT
INSERTABLE PRODUCTS
16004 CENTRAL COMMERCE DR.
PFLUGERVILLE, TEXAS 78660
Tel: [phone]
Bus: 512.487.5116
Fax: [phone]
SUN24PCB
30"W x 28-1/4"D (w/Doors) x 34-
1/2"H (w/Legs) or 30-1/2"H (no
Legs) or Up to 36" Max
Adjustable Height
MATERIAL SPECS
20 Gauge 304 Stainless Steel
for all panels, 20 Gauge 304
for framing, 304 Stainless
Steel for Rod Handles, 201
Stainless Steel for Peg-Legs
�Lifetime Structure Warranty
�304 Stainless Steel Structure
�304 SS Rod Handles
�Front & Back Kick-Plates
�Easy Pin-Lock Installation
�Soft-Close Drawer Tracks
�Covered Access Ports
�Adjustable Peg-Legs
�Optional Wheel Casters
PRODUCT DIMENSIONS
INCLUDED COMPONENTS
�Front Vented Kick Plate
�Back Solid Kick Plate
�(4) Adjustable Peg Legs
Product Dimensions
Product Trim Kits & Insert Sizes
23-1/2"
Max. Depth
34-1/2" HEIGHT W/LEGS
35-1/4" HEIGHT W/3/4" COUNTER
Bottom Utility
Access w/Cover
1' 1/2"
9-1/2"
8"
30 INCHES
28-1/4
INCH
DEPTH
W/DRAWER
PANEL
14-1/2"
HEIGHT
w/counter
22-3/4" WIDTH
24-1/2"
MAX DEPTH
When center panels are removed, install
the two smaller counter rails on each side.
short
counter
rail x2
Blaze® 20-Inch Cast Kamado - BLZ-20
Big Joe® II 24-Inch Kamado - BJ24NRHC
Pro Joe® 24-Inch Ceramic Kamado - PJ24NRHC
Joe Classic® II 18-Inch Kamado - KJ23NRHC
Caliber® Pro Stainless Steel Kamado - CTP22-SS
Remove all front Panels to allow for larger
diameter Kamado Grills, use positioning
mat below.
Base cabinet included Trim-Kit Panels
include Vertical Sides, Top Panel &
Lower Clean-out Vented Door.
PRODUCT OPTIONS
24-1/2" WIDTH
With full panel installed, this provides
a maximum insert dimension of 24-
1/2"W x 23-1/2"D x 14-1/2"H w/3/4"
Counter
Compatible w/Speed Rail Shelf, Floating
Shelf, & Riser Platform
Blaze® 20-Inch Cast Kamado - BLZ-20
Joe Classic® II 18-Inch Kamado - KJ23NRHC
Caliber ® Pro Stainless Steel Kamado - CTP22-
SS
PRODUCT OPTIONS
Removing the two center panels
allows Kamado to Bulge out of front
opening at 22-3/4"W with a internal
24-1/4"W x 23-1/2"D x 14-1/2"H
w/3/4" Counter
Compatible Riser Platform
REMOVE CENTER
PANELS TO
ALLOW KAMADO
BULGE OUT
FRONT
30" WIDTH
28-1/4" DEPTH
W/DRAWER
PANEL
SEE PRODUCT OPTION FOR
OTHER INDUSTRY BRANDS