Spec Sheet

SAC30APC SETUP INSTRUCTIONS 3
E
F
1
2
3
4
5
IMPORTANT! When extending the counter across open reaches, when
nothing is supporting beneath, the counter installer may need to install special
Steel Rod recessed into the underside of counter, consult with your counter
installer for more information.
Attach multiple front support arms to underside
of counter which helps to create a continuity to
the cabinet front trim panels. There are pre-
drilled holes in each corner panel - this is
where the counter installer can bolt from
underside securing support arms in place.
Connect multiple back panels to create multi-
fridge Runs use Item No. SCC25SPE for
Fridges up to 25" Width, SCC21SPE for
Fridges up to 21" Width, and SCC15SPE for
Fridges up to 15" Width. When connecting
panels together you must use bolts in
conjunction with the Lock-Nuts.
SCC25SPE
SCC21SPE
CREATE MULTIPLE APPLIANCE RUN BY ADDING
ADDITIONAL BACK PANELS.
46" EXAMPLE OPENING