Spec Sheet

SCC4SPEL
SCC21SPE
SCC4SPER
A
B
Bring all three panels together Item Numbers
SCC21SPE, SCC4SPEL & SCC4SPER while
supporting each in hand upright, elevate the
back panel SCC21SPE so the individual Pins
align up to the adjacent notches and the back
panel attaches to each side item SCC4SPEL on
left and SCC4SPER on right.
There are Four pre-drilled holes in each back
end side of each panel - the holes on either the
SCC4SPEL & SCC4SPER are threaded. Using a
Philips Screw Driver hand screw in Four
provided screws on either side, two at the top
one in the middle and one at the bottom.
SAC30APC SETUP INSTRUCTIONS 1
Before proceeding, review the individual
Specification Sheets of each Panel, follow any
base setup instructions - do not install any
kickplates.
SCC21SPE
SCC4SPEL
SCC4SPER
IMPORTANT! Be sure all front facing Electrical which do not have visible
access after cabinets are attached, are wired before you attach cabinets - for
easier final setup.
IMPORTANT!! - COMPLETELY
READ ALL INSTRUCTIONS
BEFORE PROCEEDING