Spec Sheet

SCC20CTK3.25
SCC20CTK3.75
SCC20CTK4.5
SCC20CTK5
SCC20CTK2.5
Compatible with Cut-Out Dimensions between 9-3/4” to 14-1/2” Width x 8” to
10-1/4" Height when combined with Counter at 3/4” Height. Additional Height
can be adjusted by adding either 1/2" Hardi Backer Board or 3/4" Plywood under
Counter.
SCC20CTK5
Item No.
9-3/4" Width
24-1/2" Maximum Depth
21-3/4" Standard Depth
17" Minimum Depth
Support Rail moves in
increments of 1-3/16" Inches
SCC20CTK4.5
Item No.
11" Width
SCC20CTK3.75
Item No.
12-3/8" Width
SCC20CTK3.25
Item No.
13-1/2" Width
SCC20CTK2.5
Item No.
14-1/2" Width
10-1/4" H w/3/4" H Counter
COMES STANDARD
Model Number
Sleeve Cut-Out
Product Option
SCC20CTK2.5
SCC20CTK3.25
SCC20CTK3.75
SCC20CTK4.5
SCC20CTK5
14-1/2" Width x 10-1/4" Height x
24-1/2" Maximum Depth
13-1/2" Width x 10-1/4" Height x
24-1/2" Maximum Depth
12-3/8" Width x 8" Height w/Rail
or 10-1/4" Height wo/Rail x 24-
1/2" Maximum Depth
11" Width x 8" Height w/Rail or
10-1/4" Height wo/Rail x 24-1/2"
Maximum Depth
9-3/4" Width x 8" Height w/Rail
or 10-1/4" Height wo/Rail x 24-
1/2" Maximum Depth
Sunstone® Cocktail Station, Sunstone®
Cocktail Pro, Alfresco® Double Burner
Sunstone® Double Burner, Double Burners for - RCS®, Lynx®,
DCS®, Alfresco®, Luxor®, Cal-Flame® Double Burner, Cal-
Flame® Cocktail Center, Coyote® Double Burner
Steele® Side Burner
8" H w/3/4" H Counter
10-1/4" H w/3/4" H Counter
Support Rail
Counter Rail
Filler Rail
Side Panel
Support Rail Option
8" H w/3/4" H Counter
8" H w/3/4" H Counter
Counter Rail
Counter Rail Option
Bullnose Counter
Bevel Counter
Remove Counter Rail to make
Counter as Full Bullnose
Trim-Kit Sleeve Dimensions
Removable Filler Rail makes Height
10-1/4" H w/Counter
Removable Filler Rail makes Height
10-1/4" H w/Counter
Removable Filler Rail makes Height
10-1/4" H w/Counter
Support Rail
Adjust Support Rail to modify
Depth Dimension, or remove
for Maximum Depth Dimension
SAC20CSDL TRIM-KIT
Disclaimer: The trademarks used in the “Product Option” column below belong to their respective owners who do not sponsor nor are they
affiliated with Sunstone Metal Products, L.L.C. The specific product Cut-Out Dimensions have not been directly confirmed by any Sunstone
Metal Products LLC, representative or employee. Use own discretion to confirm exact product fit.