Assembly Instructions

Parts/Units, (Fig. 1)
1 Bottom Base Unit
(Pre-Assembled)
1 Top Seat Unit (Pre-Assembled)
1 Swivel
4 Seat Machine Bolts
4 Lock Washers
8 Washers
4 Base Lag Bolts
1 4mm Allen Wrench
1 Instruction Sheet
Step 1 - Place Swivel on top of Base with
top front markings on Swivel facing up.
Attach Swivel to the Base Bottom using 4
Base Lag Bolts and 4 Washers. Tighten
with 4mm Allen Wrench provided. (Fig. 2)
Step 2 - Place Seat Top
upside down on table or
bench (lay a towel down to
protect from scratches).
Make note of the marking on
the top of the Swivel that
says FRONT. This side of
the Swivel must be mounted
toward the front of the
Barstool seat in order to pro-
vide proper angle for sitting.
Line up the four (4) slots in
the Swivel top with the four
(4) nut inserts that are
mounted in the seat. (Fig. 3)
Fig. 1
Fig. 2
Fig. 3
Parts/Units, (Fig. 1)
1 Bottom Base Unit
(Pre-Assembled)
1 Top Seat Unit (Pre-Assembled)
1 Swivel
4 Seat Machine Bolts
4 Lock Washers
8 Washers
4 Base Lag Bolts
1 4mm Allen Wrench
1 Instruction Sheet
Step 1 - Place Swivel on top of Base with
top front markings on Swivel facing up.
Attach Swivel to the Base Bottom using 4
Base Lag Bolts and 4 Washers. Tighten
with 4mm Allen Wrench provided. (Fig. 2)
Step 2 - Place Seat Top
upside down on table or
bench (lay a towel down to
protect from scratches).
Make note of the marking on
the top of the Swivel that
says FRONT. This side of
the Swivel must be mounted
toward the front of the
Barstool seat in order to pro-
vide proper angle for sitting.
Line up the four (4) slots in
the Swivel top with the four
(4) nut inserts that are
mounted in the seat. (Fig. 3)
Fig. 1
Fig. 2
Fig. 3