Replacement Part List

* All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any
1. Mounting the rod:
-Pull out the stop pin (1) and push the lower part of the rod (2) right down until the stop pin (1) clicks into the hole (3) in the rod.
This is easier to do if you rotate the bottom of the rod (2) slightly in both directions. The pin (1) is in place when it is completely
lodged in the hole.
-Once inserted, tighten the knob (4) securely.
2. Assemble the handle on the machine.
First put hex screws into the handle, second take handle on the shaft. Assemble the lower plate into the handle (bottom), and then
tighten the nut knob enough. See the bellowing pictures
time without notice.
SPECIFICATIONS*
ASSEMBLY
When assembling this machine, please follow the instructions for assembly steps.
6
Model name
10 in. (255mm)
0.055 in. (1.4mm)
3
0.95 in. (24mm)
16 in. (406mm)
15.75 in. (400mm)
1550
12 in. (305mm)
10 in. (254mm)
0.05 in. (1.3mm)
125 ml
Engine type
Engine displacement
Rated motor power
Lubrication
Fuel/Oil ratio
Volumes of fuel tank
Trimmer mechanism
Cutting path diameter
Trimming line
Max. engine speed-trimmer
(with cutting attachment, no-load)
Cutting data brush cutter
Cutting circle diameter of blade
Cutter balde thickness
Teeth quantity
Cutting data hedge trimmer
Cutting circle diameter
Bar length
Cutting length
Max. cutting speed
max. min-1
Cutting data pole saw
Bar length
Cutting length
Cutting length 9 in. (223mm)
Cutting data edger
Chain link thickness
Oil tank capicity
MFT 26
Air-Cooled, 2-Cycle
25.4cc (1.52 cu. in.)
0.7kw
Fuel/Oil Mixture
40:1
20 oz. (600ml)
Bump Head
15 in.(380mm)/17in. (430mm)
0.095 in. (2.4mm)
0.079 in. (2.0mm)
8400/min
Max. engine speed-brush cutter
(with cutting attachment, no-load)
9700/min