Instructions / Assembly

* All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any

1. Mounting the rod:

-Pull out the stop pin (1) and push the lower part of the rod (2) right down until the stop pin (1) clicks into the hole (3) in the rod.

This is easier to do if you rotate the bottom of the rod (2) slightly in both directions. The pin (1) is in place when it is completely

lodged in the hole.

-Once inserted, tighten the knob (4) securely.

2. Assemble the handle on the machine.

First put hex screws into the handle, second take handle on the shaft. Assemble the lower plate into the handle (bottom), and then

tighten the nut knob enough. See the bellowing pictures

time without notice.

SPECIFICATIONS*

Model name

GTI 26 BCI 26

Engine type

Air-Cooled, 2-Cycle Air-Cooled, 2-Cycle

Engine displacement

25.4cc (1.52 cu. in.) 25.4cc (1.52 cu. in.)

Rated motor power

0.7kw 0.7kw

Lubrication

Fuel/Oil Mixture Fuel/Oil Mixture

Fuel/Oil ratio

40:1 40:1

Volumes of fuel tank

20 oz. (600ml) 20 oz. (600ml)

Trimmer mechanism

Bump Head Bump Head

Cutting path diameter

15 in. (380mm) 17in (430mm)

Trimming line

0.079 in.(2.0mm) 0.095 in. (2.4mm)

Max. engine speed

(with cutting attachment, no-load)

8400/min 9700/min

ASSEMBLY

When assembling this machine, please follow the instructions for assembly steps.