Instructions / Assembly
palram.com/us 7
Always orient the cut edge of each aluminum
prole toward the top of the roof.
Measure and cut all aluminum Prole Bases, Prole Caps and Prole Cap Covers with an
angle grinder to the correct length, if required.
• Measuring & Cutting Aluminum Proles
4
Here’s how to measure the correct length
for Prole pieces:
A – Roof overhang (2" min, 8" max)
B – PLUS Length of roof run
EQUALS – Total length of each Prole Base,
Prole Cap and Prole Cap Cover
Use an angle grinder to cut each prole component to
the exact length required.
• Make sure your cuts are straight (exactly perpendicular
to the prole).
• Smooth rough edges with a metal le as needed.
Measure twice, cut once!
B
A
CUT EDGE
OF PROFILE
TOWARD
ROOF
BEFORE INSTALLATION