Instructions / Assembly

palram.com/us 19
2
After ashing is installed, measure, cut and insert Foam Flashing Strips (included in
SUNSCAPE™ Kit) under the ashing, between each aluminum Prole.
• Add double-sided outdoor foam tape (not included) to the top of each piece of Foam Flashing Strip before
inserting it under the ashing. This will adhere the foam to the underside of the ashing.
• For a snug t, cut Foam Flashing Strips 1/4" longer than the width between each aluminum prole.
APPLY THE TAPE
ONLY TO THE TOP
OF THE FOAM
FLASHING STRIP.
1
Install ashing if required by code. Flashing is NOT included in the SUNSCAPE™ Kit.
• Installing Flashing (not included)
• Installing Foam Flashing Strips (included)
DO NOT ADHERE THE FOAM FLASHING STRIP TO THE SUNSCAPE PANEL. Adhesives that are
incompatible with polycarbonate will cause the SUNSCAPE™ panel to craze and crack.
INSTALLATION