Manualshelf

Instructions / Assembly

ManualsBrandsSUNSCAPE ManualsBuilding materials12 ft. End Kit
11121314151617181920
palram.com/us 15
v
• Installing End Prole Bases with CUT Roof Panels
Still on the ground, insert the Panel Gasket and Roof Panel into the End Prole Base.
4
5
Bring the entire assembly to the roof and set it in place.
6
Fasten the End Prole Base to the end rafter through the holes along the length.
The gap behind the Panel Gasket is normal, and helps
account for expansion of the Roof Panel.
• Gently tap the End Prole Base with a rubber mallet to fully seat the Panel Gasket.
• Hammer against a length of wood to prevent damage to the End Prole Base.
INSTALLATION
RAFTER RAFTER
RAFTER