Instructions / Assembly
palram.com/us 13
5
Install the Inner Prole Cap Cover by GENTLY tapping it into place with a rubber mallet.
• Use a piece of wood to disperse the impact of the mallet and avoid damage to the Prole pieces.
• Start at the bottom of the roof line and work toward the top.
• Remove the protective lm after each Roof Panel is fully installed and secured.
• Installing Inner Prole Cap Covers
Inner Prole Cap
Inner Prole Cap Cover
THE INNER PROFILE CAP MUST BE FULLY FASTENED BEFORE ADDING THE
CAP COVER. It is very dicult to remove the Inner Prole Cap Cover after installation.
START AT BOTTOM,
WORK TOWARD TOP
INSTALLATION