Instructions / Assembly

10 Palram Americas
• Installing Inner Prole Bases
Fasten two Inner Prole Bases at or near the center of the roof.
1
USE SPACER
BAR AT EACH
HOLE
Fasten SECOND Inner Prole Base.
Fasten FIRST Inner Prole Base.
DO NOT INSTALL MORE THAN TWO INNER PROFILE BASES AT A TIME.
Otherwise, you risk accumulated measurement deviations across the roof.
• Stand between rafters and start at top of rooine.
• Center the prole in the middle of the rafter.
• Fasten screws in pre-drilled holes along the length of the rst Inner Prole Base.
• Using the spacer bar at every hole, fasten screws through the pre-drilled holes along the second Inner Prole Base.
PROFILE SPACER BAR
22-5/8"
If your rafters or purlins are made of
metal instead of wood, use the included
self-drilling screws to attach the Proles.
Be sure that the overhang length is exactly
the same for all Prole Bases.
NOTE: PROFILE
CLOSURE NOT
SHOWN IN
DRAWING
INSTALLATION