Cut Sheet

© 2020 by Sunrise Technologies, Inc. All rights reserved.
370 Paramount Drive, Raynham, MA 02767
Tel: [phone] • Fax: [phone]
Email: [e-mail]
www.sun-tech.biz | www.fpolc.com
FPFA Flush Mount
Photocontrols
Doc: V082420.4
Ordering Information
Ordering Information
FPFA Series
B Series
Flush-Mount Controls
The FPFA Series wire-in flush-mount photocontrols provide
superior performance for internal mounting requirements.
All Series FPFA controls utilize a rugged, SPST bimetallic switch.
Durable, polycarbonate housing with a clear UV-stabilized window
ultrasonically welded in place to prevent moisture ingress.
Application
The FPFA Series are compact, flush-mounted, high-temperature
resistant controls designed for industrial, commercial, and decora-
tive lighting fixtures. The versatility and reliability of these controls
allow them to be used as replacement units in a wide range of HID
outdoor lighting fixtures.
Electronic Flush Mount Control
B Series electronic “button type” photocontrols have the same
features and performance of electronic twist-lock photocontrols.
Energy efficiency is maintained with tight On/Off ratios and “non-
drift operation”. Maintenance costs are reduced through a cool-
running DC circuit.
The B Series uses the same field proven electronic circuit design
as is used in Sun-Tech high performance twist-lock photocontrols.
Application
The B Series Electronic wire in controls are compact, flush-mounted,
high temperature resist ant controls designed for industrial,
commercial, and decorative lighting fixtures. The B Series
Electronic wire-in control is designed to work with LED and HID
fixtures.
Specifications
Photocell: Conformally coated cadmium sulde cell
Switch Type: SPST-NC (single-pole, single-throw, normally
closed) bimetallic switch
Housing: UV-resistant Polycarbonate (Black)
Window: Clear, UV-stabilized Polycarbonate
Nipple: 3/8” – 18 thread; 3/4” long; ts 3/8”
knockout; 11/16” opening
Leads: 15” long, color coded;
105ºC wire, 1/2” stripped, 18 AWG
Turn-On: 1 to 4 footcandles (fc)
Turn-O: 3 to 12 footcandles (fc)
Rated Life: 5,000 operations minimum at rated load
Temperature Range: - 40º to +70ºC | - 40º to +158ºF
Model
Line
Voltage
Load Rating
Tungsten HID Ballast
FPFA-105 120 2000W 1000VA
FPFA-1068 208-277 2000W 1000VA
Model
Line
Voltage
Load Rating
Tungsten HID Ballast
B120-1.5-PTM 120 2000W 1000VA
B124-1.5-PTM 105-305 2000W 1000VA
Specifications
Photocell: Conformally coated cadmium sulde cell
Switch Type: SPST-NC (single-pole, single-throw, normally
closed) bimetallic switch
Housing: UV-resistant Polycarbonate (Black)
Window: Clear, UV-stabilized Polycarbonate
Nipple: 3/8” – 18 thread; 3/4” long; ts 3/8”
knockout; 11/16” opening
Leads: 15” long, color coded;
105ºC wire, 1/2” stripped, 18 AWG
Turn-On: 1 to 4 footcandles (fc)
Turn-O: 3 to 12 footcandles (fc)
Time Delay: 30 seconds, minimum
Rated Life: 5,000 operations minimum at rated load
Temperature Range: - 40º to +70ºC | - 40º to +158ºF
Dimensions: 2.062”L; 1.00”W; 1.53”D
The information in this document is provided for informational use only
and is subject to change without notice.