User's Manual

Chapter 5

Viewing Files

File

Next to the bar graph are a series of measurement information

displays in tabular and text form.

Technician - The name of the technician stored in the Install

Profiler is displayed.

File - The type and name of the file being viewed are displayed.

Markers – Three measurement markers are provided. Green,

yellow and purple markers are displayed on the bar graph. The

marker color corresponds to the color of the tabular display.

Markers may not be moved since their measurement criteria was

defined in the Install Profiler setup and cannot be changed once

the file is saved.

Green Marker – Displays the frequency and result of a

measurement of the average power level of a digital channel in

dBmV.

Yellow Marker – Displays the frequency and result of a

measurement of the level of analog signals in dBmV (typically

ingress or beats).

Purple Marker – Displays the frequency and result of a

measurement of the level of noise in dBmV (bandwidth

compensated).

Details

C/I Ratio - Displays the C/I (Carrier to Ingress ratio) of the

stored measurement. This is not a live measurement based on the

current marker settings, but is based on the measurements at the

time the test results were saved.

C/N Ratio - Displays the C/N (Carrier-to-Noise ratio) of the

stored measurement. This is not a live measurement based on the

current marker settings, but is based on the measurements at the

time the test results were saved.