User's Manual

PC-IP Software
User’s Manual
32
Figure 4-5
Editing the Channel Table
Select the channel table to be edited by clicking on the Channel
Table tab at the top of the Channel Tables window. Select from
STANDARD, CABLE IRC, CABLE HRC, USER 1, USER 2 or
USER 3 or any of the International plans. The name of the
channel plan may be edited by right clicking on the channel plan
tab (name), a pop-up window will appear for the user to type in
the desired channel table name.
The Channel Table lists all of the parameters for each channel in
the plan including: Channel Number, Frequency, Offset, Active,
Modulation type, Symbol Rate, Bandwidth, Video-to-Audio
Separation and Secondary Video to Audio Separation.
Individual cells in the table may be edited, channels deleted or
additional channels added. To simplify editing channel
information, multiple channels may be selected for changes to
Offset, Active, Modulation type, Symbol Rate, Bandwidth,
Video-to-Audio Separation and Secondary Video to Audio
Separation or to add entry rows or delete channels.
Individual Cell Editing
Any individual cell may be edited in an existing channel plan.
Double click on the cell to expose the pull-down window as
shown in the Figure 4-5 and select the new entry or enter the
desired setting. Click on OK to confirm the entry.
Note: Hold down Shift and double click on a group of
selected cells to open an editing window for just
those cells selected.