User's Manual
PC-IP Software
User’s Manual
14
When the software key is obtained, type or copy it into the box
labeled “Software Key” and click on the Key button. Until you
obtain the software key, you may bypass the key requirement by
clicking on the Bypass button. Each time you use the PC-IP in
the Bypass mode, your “Number of Unregistered Runs
Remaining” will decrement by one. To close the screen without
using one of your “Unregistered Runs”, click on Cancel.
Once all 10 “Unregistered Runs” are used, you will not be able
to get beyond this screen nor use the PC-IP software until you
enter a software key.
Once the software key is entered, no registration screen is
displayed and the program will open with the main screen.
Figure 3-2