User's Manual

Chapter 1
Software Overview
3
For proper operation, the Belkin adapter and software should be
installed before your PC-IP software. If necessary, un-install
PC-IP and re-install after the USB to Serial port adapter software
is installed.
SOFTWARE COMPATIBILITY
Install Profiler firmware may be updated free of charge at the
Sunrise Telecom website using a computer meeting the
requirements above along with a modem and appropriate
Internet browsing ability. Instructions for the update are
provided at the website: www.sunrisetelecom.com/broadband.
The latest PC-IP software may require updating your Install
Profiler firmware.
PREPARATION FOR USE
Read this section to prepare the Sunrise Install Profiler for use
with the PC-IP Software. Follow the instructions for unpacking
and installing the software carefully. Compare the received
items to the packing list. Follow the initial checkout procedure
in the Install Profiler manual to verify that the Install Profiler is
in good working order.
Unpacking and Initial Inspection
Inspect the shipping container when the software is received. If
the shipping container or shipping material is damaged, check
the contents of the shipment for completeness. Notify Sunrise if
the contents are incomplete. If the shipping container is damaged,
keep the container and packing materials for inspection by the
carrier, and notify the carrier immediately.
Shipment Contents
The following items are supplied with the PC-IP Software:
• PC-IP software CD-ROM
• PC-IP software User’s Manual
Note: You will also need the Install Profiler and the serial
port straight-through cable supplied with the Install
Profiler. This is the cable used to connect the Install
Profiler to your PC.