User's Manual

PC-IP Software
User’s Manual
44
for a comprehensive set of test results. PC-IP software facilitates
ensuring that all your Install Profilers are identically configured
to the appropriate specifications.
By setting limits for the various locations, the operator is able to
get a quick indication of a failed parameter. While operating the
unit, all values shown on the active test screen will automatically
be checked for compliance based on the limits set in the Limits
Setup screen. If a test result falls within the limits set, the value
will appear in GREEN. If a test result falls outside the bounds
of the limits, the value will appear in RED. Proper setting of
these limits simplifies the units’ operation for less experienced
technicians and enhances their ability to troubleshoot.
Figure 4-21