User's Manual

Chapter 3
Using PC-IP Software
19
Figure 3-4
When the connection issue is resolved, the PC-IP software will
re-connect.
Load
The Load icon opens a window displaying the list of files stored
in the Install Profiler’s memory and to view the files. Files can
also be moved from the Install Profiler’s memory to the computer
directory. Files stored in the Install Profiler’s memory are
displayed on the PC-IP Load screen by date and time, oldest first.
The file names are the names entered at the time the screen was
captured followed by the Install Profiler’s screen title at the time
of the capture. To view files stored on disk (hard drive or other
disk) in the PC, use the File Open command from the menu bar
or the Open icon.
All of the files may be saved to a directory on the PC by clicking
on the Load and Save All button. A pop-up window displays the
last directory used and allows the user to select a new directory,
if desired, to save the files.
Note: File date and time will be changed when it is saved to
your PC. This is a characteristic of Windows™. In a
future update, the original file date will be stored in
the file and a display added to the test result screens.