Instructions / Assembly

HEATER BUTTON
The HEATER BUTTON is used to turn the heater on or off. Pressing the HEATER BUTTON once
turns the Heater on. Pressing the HEATER BUTTON a second time within 10 seconds will turn the
heater off. When turn off the heater, the quartz tubes will stop working first, then the blower after 60
seconds.
When the heat is on, press the INCREASE/DECREASE BUTTON to change the desired
temperature. There are 11 temperature settings : 82℉-ON - 64℉- 66℉ - 68℉-70℉-72℉-74℉-
76℉-78℉-80℉ (27℃-ON - 18℃-19℃- 20℃-21 ℃-22℃-23℃- 24℃-25℃-26℃).
ON means the quartz tubes keep working.
Temperature unit convert function: With the heater on, press and hold the POWER BUTTON for
5 seconds, current temperature unit display will flash 3 timers and convert to another temperature
unit. (Note: This can't be set with the remote control).
Lock & unlock heater function: Press and hold the HEATER BUTTON for 10 seconds, the ember
bed will flash 6 times, indicating that the heater function is locked. To unlock the heater function, just
repress and hold the HEATER BUTTON for 10 seconds again, then the ember bed will also flash 6
times indicating the heater function is unlocked and to recover the original states which you have
set. (Note: This can't be set with the remote control).
TIMER BUTTON
The TIMER BUTTON is use to set the timer at range from 1 hour to 9 hours and OFF. As shown
the following: 1h-2h-3h-4h-5h-6h-7h-8h-9h-OFF. If the digital display turns on and nothing happens
within 10 seconds, the digital display will auto shut off. Once you have set the timer, and the timer
is up, close all the functions and enter standby mode. In this mode, you should press the POWER
BUTTON to restart the appliance.
INCREASE/DECREASE BUTTON
With the heater on, press the INCREASE/DECREASE BUTTON to change the desired tempera-
ture. There are 11 temperature settings:82℉-ON-64℉-66℉-68℉-70℉-72℉-74℉-76℉-78℉-80
℉(27℃-ON -18℃-19℃-20℃-21℃-22℃-23℃-24℃-25℃-26℃).
01 02 03 04 05 06 07 08 09 10 11