Instructions / Assembly

-15- -16-
STEP 4: - Trampoline Mat Assembly
WRNING: Attaching springs, the connecter points can become pinch points since the
trampoline is tightening up. With this in mind please be careful attaching springs to the
trampoline mat. Please be careful.
You will need at least one person to help with this portion of assembly.
Layout the “Trampoline Mat” inside the frame on the floor as picture above.
STEP5: ATTACHING THE SPRINGS TO TRAMPOLINE MAT
The springs need to be placed in
position as shown in the diagram to the
right, in order to pull the “Trampoline Mat”
in all four directions .
The image to the right specifies and
details the spring positions to hold the
“Trampoline Mat” in place.Please see
the table for the positions of springs for
the different sizes of Trampoline:
Trampoline
＃
A
＃
B
＃
C
＃
D
8FT trampoline 1 12 24 32
10FT trampoline 1 14 28 42
12FT trampoline 1 18 36 54
13FT trampoline 1 20 40 60
14FT trampoline 1 22 44 66
15FT trampoline 1 25 50 75
16FT trampoline 1 27 54 81
HOW TO USE THE “SPRING LOADINGTOOL”
Firstly hang one side of spring on the triangle
attached to The “Trampoline Mat”,and use the
“spring tool” to hook the other side of spring (As
shown in the top image.to the right).
Pull the “Spring Tool” until the spring hook insert the
hole on the“trampoline frame”and disengage the
“Spring Tool” leaving the “Spring” in place. Repeat
process for all springs .
WARNING: Please be careful where your
hands and other parts of the body are placed as the
connector points and spring attachments can create
hand or body traps.