User's Manual

VAREXX 2.4GHz Wireless Keyboard

KR901A(Keyboard)

RX901A(Dongle)

User Manual

Important Information

For Windows® XP and Windows® Vista operating system, you can use the

keyboard immediately after plugging the dongle (receiver) into the USB port.

This Wireless keyboard operated in the 2.4GHz unlicensed worldwide Industrial

Scientific and Medical (ISM) band (2.400GHz~2.483GHz), and used 2.4GHz Direct

Spread Spectrum (DSSS) radio transceiver.

Hardware Installation

1. Plug in the dongle into your available USB port.

2. Make sure the batteries of the keyboard is installed correctly. Please follow the

polarity signs in the battery compartment.

3. Please make sure the power switch on the back of the keyboard is switched to

“ON” before using the keyboard. When not in use, please turn the power switch to

“OFF” for power saving.

ID Pairing Procedure

Keyboard and dongle has paired when ship out. If it can’t work, please follow the

steps to process the ID pairing procedure.

1. ID pairing/connect button location:

Keyboard ID pairing/connect button on the bottom of the keyboard.

2. After you plug the dongle into the USB port, please hold the keyboard close to the

dongle within 0.5M and press the “CONNECT” button over 3 seconds.

3. If ID pairing is successful, the LED on the dongle will bright 3 seconds.

4. If ID pairing is fail, please follow the steps above to pair ID.

PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

PAGE 1
VAREXX 2.4GHz Wireless Keyboard KR901A(Keyboard) RX901A(Dongle) User Manual Important Information For Windows® XP and Windows® Vista operating system, you can use the keyboard immediately after plugging the dongle (receiver) into the USB port. This Wireless keyboard operated in the 2.4GHz unlicensed worldwide Industrial Scientific and Medical (ISM) band (2.400GHz~2.483GHz), and used 2.4GHz Direct Spread Spectrum (DSSS) radio transceiver. Hardware Installation 1.
PAGE 2
Note: -Make sure your PC is ON and running when doing the pairing procedure. -You don’t have to pair ID again after changing batteries. If it can’t work, please follow the steps above to pair ID. Hotkey function u u u u u Fn+F3à Mute Fn+F4à Volume down Fn+F5à Volume up Fn+F6à International Fn+F7à E_Mail Import Usage Information u Battery: 1. We recommend using alkaline batteries for a longer battery life. 2. Don’t mix different types of batteries or new and old batteries together.
PAGE 3
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.