Instructions / Assembly

4
1 Firstly , U need to fix the left back board ,
right back board & back board (in package
side board ,fore& back board package )
near where U want to located the sauna
room .Due to its heavy weight , it is difficult
to move it again after the installation . After
the 3pcs back board standing up , pls. lock
them by screws .
Screws
4x40
4.Put the top cover on the sauna room.(in
package bottom frame & top board ) There are
corresponding holes for the top leds &
explosion-proof light wires.Pull them out from
the holes. After that, check whether all the
angles& position of the top board are correct ,
and lock the corresponding part in the top board.
(in package top board &seat board & its support )
7