Installation Guide

7
OPERATION
Control panel
1. Mode (function) select button
2. Timer button
3. “Water Full” indicator
4. Sleep button
5. Fan speed button
6. Low fan speed indicator
7. High fan speed indicator
8. Receiver for remote control
9. Sleep operation indicator
10. “Temperature down” button
11. ON/OFF (power) button
12. “Temperature up” button
13. Timer operation indicator
14. Compressor operation indicator
15. Heat mode indicator
16. Fan mode indicator
17. Cooling mode indicator
18. Auto mode indicator
Turning ON/OFF
1. Press ON/OFF button and unit will start automatically. If ambient temperature is:
 Above 74°F/23°C, the unit will work in Cool mode.
 Above 68°F/20°C but below or equal to 74°F/23°C, th e unit will work in Fan mode.
 Below 68°F/20°C, the unit will work in Heat mode.
2. Indicators of the functions in progress will illuminate.
NOTE: The display window shows ambient room temperature from 32~122°F/0~50
o
C.
3. To turn the unit off, press ON/OFF button again.
Setting mode/function
Press MODE button to select desired working mode: AUTO, COOL, FAN or HEAT.
The indicator of selected mode will illuminate.
Setting temperature
1. Press 'Temperature up' or 'Temperature down' button to set desired temperature.
2. The display window will show the set temperature as the UP or DOWN buttons are pressed.
Once the buttons are release, display will revert to show the ambient temperature.
3. The pre-set temperature is 75°F/24°C for cooling an d 68°F/ 20°C for heating.