Manual

5
FILLING THE WATER TANK
Place the appliance on a flat, stable surface:
The water tank is located on the
back of the unit.
Lift up the tank by its handle. Remove tank from unit, in a
vertical direction.
Invert tank.
Unscrew cap and fill with
clean cool water.
Replace cap and replace tank
back in place.
WARNING!!
• When the tank is filled with water, do not remove and replace tank without a
particular necessity. Frequent lifting and replacing of the tank may lead to
overflow and cause damage to the unit.
• Do not use hot water and do not add any fragrance or other additives to the tank.
MAINTAIN AND PROTECTION
 Always ensure that the fan is switched off, stopped and disconnected from the
mains power supply before cleaning.
 Do not place the unit or plug in water or other liquid.
 Do not scrub the housing with scouring pads. Use a soft damp cloth to wipe the
housing clean. For stubborn marks, use a mild dishwashing solution on a clean,
damp, cloth. Be sure cloth is not too wet and wipe dry immediately.
 If the water tank is dirty, fill tank and add small amount of mild detergent or citric
acid. Recap the tank and shake well. Pour the soapy water and rinse well.
 Empty the water tank and allow it air dry completely before storage.
 For storage, keep in a cool, dry place and out of the reach of children.
Item No.: SF-3312M
Voltage/Frequency: 120V/60Hz
Water tank capacity: 2L
Rated power: 80W
Unit dimension 15.625(W) x 9(D) x 32(H) inches
Package dimension 13.75 x 12.75 x 33.25 inches
Net/Gross weight 12.40 / 15.75 lbs