6” OUTDOOR MISTING FAN Model: SF-1666M READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USE
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Use this fan only as described in this manual. Other uses not recommended may cause fire, electric shock or injury to persons. 2. This product is intended for household use ONLY and not for commercial or industrial use. 3.
PARTS IDENTIFICATION Nozzle Plug Accessories • Extra nozzle x 1 • Nozzle plug x 1: replace misting nozzle with nozzle plug to block water atomization where mist is not desired or needed. The important safety instructions of the fan shall include the following statements: • This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per instructions and check the product.
ASSEMBLY INSTRUCTIONS Important: Assemble the fan before plugging it in. 1. Screw threaded outer pole into threaded base. Hand tighten until firmly secured. Use no tools. HEIGHT ADJUSTMENT: Loosen the height adjustment knob (counterclockwise), adjust height to desired position and tighten the knob (clockwise). 2. Loosen the set screw on the back of the control box and set the control box onto the inner pipe. Then tighten the set screw to secure the control box and motor head to the inner pipe.
OPERATING INSTRUCTIONS Place the fan on a level surface. Plug the plug into a standard 120volt AC wall outlet with ground. To operate, push the control button corresponding to the desired speed: LOW, MED or HIGH. To stop operation, press the OFF button. THE ANGLE OF THE FAN HEAD IS NOT ADJUSTABLE. OSCILLATION - Press the knob down (on the motor head) for fan oscillation or pull the knob up to stop oscillation. MISTING - Attach the ¾” hose adapter to any ¾” (standard) garden hose or spigot.
CARE & STORAGE • • • • • • • Turn off power and unplug unit before cleaning. Use only a soft moistened cloth with a mild soap solution to clean the fan. Do not immerse fan in water. Do not use gasoline thinners or other chemicals to clean fan. To dismantle for cleaning or long term storage, follow the assembly instructions in reverse order. The fan blade may be washed in warm water with a mild detergent. Alternatively, it may be wiped clean with a soft damp cloth.
Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge. This guarantee is subject to the following terms: • Sunpentown must be notified of the fault. • Proof of purchase must be presented to Sunpentown’s nominated representative. • The warranty will be void if the product if modified, misused or repaired by an unauthorized person.