User's Manual

ManualsBrandsSunpak ManualsFlashes & On Camera LightingDF3600U Flash for Canon and Nikon Cameras

3, Complete setup

After set up press again the【 Parameter Settings button 】to exit the set

status. If FEB value is not 0 displays, as shown by the custom function can

be set FEB exposure sequence.

On-line operation

Flash TTL mode

Through the hot shoe connection Canon camera;

Screen displays E-TTL to represent the current metering system;

Through the hot shoe connection Nikon camera;

Screen display i-TTL to represent the current metering system;

Because the Nikon system does not support flash on FEB Settings, while

online does not display the FEB information, to realize surrounded the

exposure function on Nikon (BKT), please refer to the camera Settings.

Flash exposure lock (FEL/FV)

Use flash exposure lock, you can lock the correct

flash exposure Settings for each parts of scene.

When flash TTL mode is displayed on the LCD

screen, please connect the flash with camera

correctly. Canon camera press the

" FEL" or "*" (AEL- Auto exposure lock) button,

Nikon Camera press "FV" button, Then the flash

give off preflash, camera will calculate the

appropriate flash output data, At this point you

have a time to re composition, After it finished you

can press the shutter to shooting.(This feature

requires to camer support to use.Please refer to

your camera manual set)

13 14

AV/A

TV/S

Other Automatic flash shooting mode

As long as the camera's shooting mode to (AV) or A (Aperture priority ae),

the [TV] S (Shutter priority ae) or [M] (Manual), you can also use E-TTL

/ i-TTL flash Automatically

Select this mode to manually set the shutter speed.Value is Automatically

set to match the camera shutter speed circle for standard exposure.If the

aperture display flashing, means that the background underexposed or

overexposed, adjust the shutter speed until the aperture stop flashing.

Select this mode to manually set the aperture value.The camera is

Automatically set to match the aperture shutter speed to achieve

standard exposure.If the dark background, such as at night), will use

the slow sync in order to obtain the main your subject and the

background of the standard exposure.Using flash for MASTER of your

subject standard exposure.Use the slow shutter background exposure

standards.Because for low illumination scene will use the slow shutter,

it is recommended to use a tripod.If the shutter speed display flashing,

means that the background underexposed or overexposed.Adjust the

display stops flashing until aperture shutter speed.

To manually set the shutter speed and aperture when choosing this pattern.

Using flash for MASTER of your subject standard exposure.Using a

combination of you to set the shutter speed and aperture to obtain

background exposure.

If you use the < DEP > or < A - DEP > shooting model, The result and use

< P > (AE) model is the same.

Flash Sync Speeds and Apertures Value.

Shutter Speed Setting

Aperture Setting

Set Automatically(1/60 sec.~1/Xsec.)

Set manually(30 sec.~1/Xsec.)

Set Automatically(30 sec.~1/Xsec.)

Set manually(buLb,30 sec.~1/Xsec.)

Automatic

Manual