User's Manual

Common flash mode
Divided into Automatic flash mode, TTL mode, M manual flash and
Stroboscopic flash mode Multi.
Automatic TTL flash mode
Set the camera's shooting mode to < P > (Program Auto Exposure) or Green
frame < □ > (Auto), fully Automatic flash will make flash photography and
modes of the < P > and < □ > as simple as Ordinary TTL Mode flash.
Select the flash mode
1.Press MODE flash mode select button in
common flash mode.
2.Press 【MODE】 mode button until the
LCD display .
Set the flash exposure compensation value.
The exposure compensation can be set in standby
mode..
1, The Left and Right buttons set can set the exposure
compensation value:
Right Button: The exposure compensation is
increased; Left Button: The exposure compensation
value is decreased.
2, The compensation range can be set of -3.0EV to
+3.0EV.Its compensated value Icon:
0EV→+0.3EV→+0.7EV→+1.0EV→+1.3EV→+1.7EV→. . . .→+3.0EV
0EV→-0.3EV→-0.7EV→-1.0EV→-1.3EV→-1.7EV→. . . .→-3.0EV
11 12
0
3.02.72.32.01.71.31.00.70.3
By FEB you can stay under the condition of invariable background exposure
Automatically change the main body of the flash exposure. Surrounded by
three exposure can be adjusted according to 1/3 to plus or minus a level 3,
according to the lack of correct exposure, exposure and order of overexposed
exposure (Order by custom). In after completion of all three surrounded by
exposure, surrounded by flash exposure automatically cancel ( Non automati
FEB setting value
FEB setting surrounded by exposure value
( Effective for Canon cameras only )
Standby mode press “Parameter Settings button", surrounded by the current
exposure value, enter the set state.1, Surrounded by rotary dial can adjust
exposure valueClockwise rotation, surrounded by the exposure value, in turn,
For flash surrounded the exposure function, set the camera driver Mode to "
single shot" and to ensure that the flash is ready before filming. Connect the
Canon camera, set on the flash exposure value surrounded exposure; Connection
Nikon, surrounded by not showing on the flash exposure information, if you need
to confirm the use of the camera support surrounded the exposure function, if
support, please refer to the camera set.
cally canceled in the custom set ).
increases; Counterclockwise, surrounded by the exposure value decreases in
turn.2, The exposure value range is 0 to 3.0. Surrounded by the exposure value
is: 0 1 1.3 1.7 2.0 0.3 0.7 2.3 2.7 3.0