User Manual

27 28
- → 0→ +
0 → - → +
1
0
1
0
1
0
1
0
1
0
Fn-
14
Fn-08
Fn-04
Fn-03
Fn-01
Fn
-15
F
No
Function
Setting
NO.
Description
Auto sleep
Auto cancel
flash exposure
Flash exposure order
Auto focus assisant flash
Buzz switch
Version
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Date
Note: Fn ON: 00-13 option by outlay flash light customer menu of camera
menu to setting. No: 00、02、05、06、07、09、10、11、12、13 option had
been ON(Canon inside menu)
According to your request to set up customer menu.
Customer menu setting:Long press
【Customer menu button】” as left picture ;
Press <Parameter setting button) to select setting option.Rotary dial to setting
ON or OFF,then press 【Model flash select button】to quit.
Automatic save function
After flash set up, 5 seconds without keystrokes, will automatically save
the current Settings, It is convenient for next time operation .
Setting clear
When you need to clear the changes on the flash, restore the factory default
settings, just at the same time hold down the "parameter settings button" and
"High speed /Rear curtain/Ordinary flashlight switch button, the flash to
restore the default Settings.
Flash lock (Low power tips)
When the battery power is low or other reasons cause flash charging is not
completed within the limit time, the flash will enter a state of lock, Mean
while the screen display as shown in figure, short channel with a buzzer
sounded, remind the user to replace the battery to ensure the normal use,
if change after fully charged batteries, flash light can't recycle back in a
limited amount of time (20 seconds) to recycle back, please contact after
sell service.
Preset at the same time